Façade floodlight

We have developed a linear façade floodlight in two lengths, specially designed for the wide-area illumination of partial or entire façades. The floodlights on this page are available in two colour temperatures, 3000 K or 4000 K, with symmetrical or asymmetrical light distribution.

BEGA façade floodlights can be installed side by side to form a continuous light strip. The electrical connection to the next luminaire is established using convenient and easy-to-use five-pole plug connectors. We offer connection cables in various lengths for bridging larger distances.

Technical data

Protection class IP 65 BEGA Thermal Management®

Cast aluminium, aluminium and stainless steel BEGA Unidure® coating technology Safety glass Reflector made of pure anodised aluminium

DALI-controllable power supply units

The connection cables can also be used as maintenance cables. The luminaires can be controlled via DALI colour light control (DT8, RGBWAF, xy).

Please note: A separate connection box is required for the electrical connection to the luminaires. If the luminaires are connected in series (max. 12 luminaires per connection), a connection box is only required for the first luminaire. For installation with wall outrigger arms, please order connection box 71 064. Connection boxes are accessories and must be ordered separately. The connection from one luminaire to another is made with the connection cables supplied with the luminaires.

20-year availability guarantee for replacement parts and LED modules

View planning examples

Historical building

For the illumination of the building with floodlights, the aim is to illuminate all sides of the complex as uniformly as possible. An obvious solution is to position the high-performance floodlights symmetrically at the corners of the building. In most cases, one floodlight position is sufficient for two sides of the building. The floodlights are frequently fitted with louvres or shields to ensure that the focus is only on the building. It is recommended that the luminaires should be installed on luminaire poles to protect passers-by from irritating glare. The illumination of the building is supplemented by façade floodlights forming a continuous light strip for linear illumination. As a rule, the final floodlight locations and output levels are only defined after an initial trial illumination.

Historical façade

Various different luminaires are used to illuminate historical façades. Beginning on the ground floor, arcades are illuminated with in-ground floodlights. Here it is important to make sure that the luminaires can stand up to being driven over by car tyres. Depending on the version of the luminaires, pressure loads of up to 5000 kg are possible. Between the floors, the house has ledges from where slim adjustable façade floodlights can illuminate the building. Their light distribution is symmetrical.

Advertising space

The illumination of advertising spaces repeatedly presents new challenges. A change in motif from a very light to a dark motif, or vice versa, requires an adjustment of the degree of illuminance for the advertising to be effective. In this case, a control unit for the luminaires is strongly recommended in order to provide numerous options for illuminating advertising posters. In the following, we should like to present tried and tested solutions, and show you the differences in light effects on an advertising space of 4 x 6 m.