Photo : Nikolay Kazakov

Recessed luminaires for walls and staircases

For flush or surface-mounted installation

For decades, BEGA luminaires from this series have been outstanding lighting construction details on numerous structures worldwide. We are constantly developing these luminaires and always perfectly match the construction and design to our LED technology.

The electrical connection is comfortably established before installation in the structure. The now-connected luminaire is then mounted in the building structure or installation housing using the BEGA mounting system. All installation dimensions are identical to those of the previous luminaires. The slim, screwless luminaire frames are distinctive in their design.

Depending on the size, the luminaires can be installed in risers and in walls – both indoors and out.

Combined LED emergency lighting luminaires with integrated single battery for 3 hours of emergency operation in the event of a power failure. Luminaires according to EN 60598-2-22.

Technical data

The unshielded luminaires are available with a choice of two light outputs. As luminaires for areas of application where a higher degree of illuminance is required or as location luminaires with lower light output.

Protection class IP 65 BEGA Thermal Management®

Cast aluminium, aluminium and stainless steel BEGA Unidure® coating technology Safety glass

20-year availability guarantee for replacement parts and LED modules

Technical amendments reserved.

The shielded luminaires are used to identify points of danger and traffic areas in low ambient brightness.

Protection class IP 65 BEGA Thermal Management®

Cast aluminium, aluminium and stainless steel BEGA Unidure® coating technology Safety glass

20-year availability guarantee for replacement parts and LED modules

The shielded luminaires are used to identify points of danger and traffic areas in low ambient brightness.

Protection class IP 65 BEGA Thermal Management®

Cast aluminium, aluminium and stainless steel Coated with BEGA Tricoat® Safety glass

Luminous flux in the upper half-space < 1%

3000 K or 4000 K colour temperature settings available

20-year availability guarantee for replacement parts and LED modules

Luminaires with asymmetrical light distribution illuminate ground surfaces in the depth of the room.

Protection class IP 65 BEGA Thermal Management®

Cast aluminium, aluminium and stainless steel Coated with BEGA Tricoat® Safety glass Reflector made of pure anodised aluminium

20-year availability guarantee for replacement parts and LED modules

Luminaires with asymmetrical flat beam light distribution emit their light into the width of the room and illuminate ground surfaces uniformly with a wide beam.

Protection class IP 65 BEGA Thermal Management®

Cast aluminium, aluminium and stainless steel BEGA Unidure® coating technology Safety glass Reflector made of pure anodised aluminium

20-year availability guarantee for replacement parts and LED modules

These recessed wall luminaires with asymmetrical light distribution are particularly suitable for the illumination of ground surfaces from a very low mounting height (0.3 to 0.5 m). Available in different sizes and with different light outputs, these luminaires provide spatial illumination with high uniformity.

Protection class IP 65 BEGA Thermal Management®

Cast aluminium, aluminium and stainless steel BEGA Unidure® coating technology Safety glass Reflector made of pure anodised aluminium

20-year availability guarantee for replacement parts and LED modules

View planning examples

Gymnasium
In a spa zone, the illumination makes a significant contribution towards the well-being of the guests. Alternating zones with dimmed light and zones accentuated with illumination are ideal for the relaxation of the guests. At the same time, the lighting system must be able to illuminate the rooms clearly for cleaning purposes. On account of the climatic conditions in such facilities, only luminaires with high protection classes are installed. In the whirlpool cubes, wall luminaires cast wide-beam light onto the ceiling, and this light is reflected softly back into the room. The pools are fitted with underwater luminaires whose light colour can be adjusted variably via RGBW. Between the cubes, in-ground floodlights accentuate the shower area. This light effect is repeated on the front pillars using in-ground floodlights. In the room, soft light falls from the ceiling via flat square luminaires. Recessed wall luminaires line the paths at a height of 40 cm, thus creating safety and structure. Recessed ceiling downlights are installed in the outdoor terrace covering roof.
Spa
In a spa zone, the illumination makes a significant contribution towards the well-being of the guests. Alternating zones with dimmed light and zones accentuated with illumination are ideal for the relaxation of the guests. At the same time, the lighting system must be able to illuminate the rooms clearly for cleaning purposes. On account of the climatic conditions in such facilities, only luminaires with high protection classes are installed. In the whirlpool cubes, wall luminaires cast wide-beam light onto the ceiling, and this light is reflected softly back into the room. The pools are fitted with underwater luminaires whose light colour can be adjusted variably via RGBW. Between the cubes, in-ground floodlights accentuate the shower area. This light effect is repeated on the front pillars using in-ground floodlights. In the room, soft light falls from the ceiling via flat square luminaires. Recessed wall luminaires line the paths at a height of 40 cm, thus creating safety and structure. Recessed ceiling downlights are installed in the outdoor terrace covering roof.
Train station forecourt
In a spa zone, the illumination makes a significant contribution towards the well-being of the guests. Alternating zones with dimmed light and zones accentuated with illumination are ideal for the relaxation of the guests. At the same time, the lighting system must be able to illuminate the rooms clearly for cleaning purposes. On account of the climatic conditions in such facilities, only luminaires with high protection classes are installed. In the whirlpool cubes, wall luminaires cast wide-beam light onto the ceiling, and this light is reflected softly back into the room. The pools are fitted with underwater luminaires whose light colour can be adjusted variably via RGBW. Between the cubes, in-ground floodlights accentuate the shower area. This light effect is repeated on the front pillars using in-ground floodlights. In the room, soft light falls from the ceiling via flat square luminaires. Recessed wall luminaires line the paths at a height of 40 cm, thus creating safety and structure. Recessed ceiling downlights are installed in the outdoor terrace covering roof.

Image gallery

Recently viewed products

Information about BEGA products in North America

BEGA North America manufactures in the Americas for the Americas. Products are manufactured with the appropriate specifications and in conformance with UL, CSA, and NOM listing standards. If you reside in the United States, Canada, Mexico, Central America, or the Caribbean Sea, please visit BEGA North America’s website for product information and local support.

Continue to www.bega-us.com
Don’t show this message again